0001944: You can clear the ground of customizables houses, cell by cell

(0001012)
Terrikate (developer)
11-04-11 00:19

Link to a video made by one of our players, so you don't have to download it.

http://www.youtube.com/watch?v=3CMFhItIdYw [^]

(0001019)
MrSugarCube (administrator)
12-04-11 01:18
edited on: 12-04-11 01:19

If you reenter design mode and press the 'Synch' button, is the hole still there?

I've tried following your steps here (and the video's, which are slightly different) but the dirt doesn't disappear. I do get a weird display issue though where if I target the top of the stairs then a new line of dirt appears on the 2nd floor, but this disappears as soon as I press 'Synch', 'Commit' or exit design mode (I suspect in my case it could be an issue with client 7.0.13.2).

(0001020)
Terrikate (developer)
12-04-11 01:39

Yes, in addition to the steps to reproduce are less, hehe.

1º Enter design mode
2º Create stairs
3º Remove
4º Synch || Close design mode || Commit

Here i use the client 7.0.8.2

(0001021)
MrSugarCube (administrator)
12-04-11 02:21
edited on: 12-04-11 02:29

Could you try disabling the house menu + triggers (@HouseDesignCommit), and instead use '.xlink.customize' to design the house (target the sign) to see if this still happens? I'm still not able to get the dirt to disappear here (just tried with 6.0.1.6 too).

"4º Synch || Close design mode || Commit"
You can also reproduce it by closing design mode without committing?

(0001022)
Terrikate (developer)
12-04-11 02:41

Problem persist. Tomorrow I'll try with a clean installation of sphere to see.

"4º Synch || Close design mode || Commit"
You can also reproduce it by closing design mode without committing?

Sorry, only with commit or synch.

(0001317)
Terrikate (developer)
19-05-12 15:49

Nobody else has this problem?. Mostly because if I have to keep looking for a solution.

Thanks.

(0001318)
ShiryuX (developer)
21-05-12 01:30

I can't reproduce this with the default scp pack. Clean install, nightly.

Issue History
Date Modified	Username	Field	Change
10-04-11 21:10	Terrikate	New Issue
11-04-11 00:19	Terrikate	Note Added: 0001012
12-04-11 01:18	MrSugarCube	Note Added: 0001019
12-04-11 01:19	MrSugarCube	Note Edited: 0001019	View Revisions
12-04-11 01:39	Terrikate	Note Added: 0001020
12-04-11 02:21	MrSugarCube	Note Added: 0001021
12-04-11 02:29	MrSugarCube	Note Edited: 0001021	View Revisions
12-04-11 02:41	Terrikate	Note Added: 0001022
19-05-12 15:49	Terrikate	Note Added: 0001317
21-05-12 01:30	ShiryuX	Note Added: 0001318
17-09-12 20:44	Terrikate	Assigned To	=> Terrikate
17-09-12 20:44	Terrikate	Status	new => assigned
17-09-12 20:48	Terrikate	Status	assigned => resolved
17-09-12 20:48	Terrikate	Fixed in Version	=> 0.56c Nightly
17-09-12 20:48	Terrikate	Resolution	open => fixed

Notes
(0001012) Terrikate (developer) 11-04-11 00:19	Link to a video made by one of our players, so you don't have to download it. http://www.youtube.com/watch?v=3CMFhItIdYw [^]

(0001019) MrSugarCube (administrator) 12-04-11 01:18 edited on: 12-04-11 01:19	If you reenter design mode and press the 'Synch' button, is the hole still there? I've tried following your steps here (and the video's, which are slightly different) but the dirt doesn't disappear. I do get a weird display issue though where if I target the top of the stairs then a new line of dirt appears on the 2nd floor, but this disappears as soon as I press 'Synch', 'Commit' or exit design mode (I suspect in my case it could be an issue with client 7.0.13.2).

(0001020) Terrikate (developer) 12-04-11 01:39	Yes, in addition to the steps to reproduce are less, hehe. 1º Enter design mode 2º Create stairs 3º Remove 4º Synch \|\| Close design mode \|\| Commit Here i use the client 7.0.8.2

(0001021) MrSugarCube (administrator) 12-04-11 02:21 edited on: 12-04-11 02:29	Could you try disabling the house menu + triggers (@HouseDesignCommit), and instead use '.xlink.customize' to design the house (target the sign) to see if this still happens? I'm still not able to get the dirt to disappear here (just tried with 6.0.1.6 too). "4º Synch \|\| Close design mode \|\| Commit" You can also reproduce it by closing design mode without committing?

(0001022) Terrikate (developer) 12-04-11 02:41	Problem persist. Tomorrow I'll try with a clean installation of sphere to see. "4º Synch \|\| Close design mode \|\| Commit" You can also reproduce it by closing design mode without committing? Sorry, only with commit or synch.

(0001317) Terrikate (developer) 19-05-12 15:49	Nobody else has this problem?. Mostly because if I have to keep looking for a solution. Thanks.

(0001318) ShiryuX (developer) 21-05-12 01:30	I can't reproduce this with the default scp pack. Clean install, nightly.

Relationships